Create your own One of a Kind Rockin' Dockin' Station. Here's how...
Choose a work area that will not be disturbed for 8+ hours. Cover with newspaper or other protective material if necessary.
Sand down each piece of wood to remove any rough edges and sharp corners.
Apply a bead of glue to each of the beveled edges of the walls.
Stand the walls up and use the string to pull the edges together. Tie the string in a knot and then use your hands to line up the edges with one another. Leave for 8+ hours to allow glue to dry before moving to step 5.
Apply a drop of glue to each of the phone supports. Place them on the base beside the charging cable hole so that your phone will protrude through the top of the docking station.
Apply a bead of glue around the edges of the base except where the phone protrudes from the docking station.
Place the walls onto the base. Ensure that the slot for the phone lines up with the edge that is free of glue. Leave undisturbed for 8+ hours to allow the glue to dry before moving to step 8.
Apply a bead of glue to the stand and place it on the bottom of the docking station 1-2” from the opening with the beveled edge angled downwards and away from the opening. Leave undisturbed for 8+ hours before moving to step 9.
Remove any excess glue or rough edges with sandpaper.
Paint, stain, or customize your One of a Kind Rockin’ Dockin’ Station.